Skip to main content

Site Navigation

Your Account

Choose Language

  1. Hit 'Export' in the top right. In the pop up, select the desired objects and click the STL button. In the pop up, select the desired objects and click the STL button.
    • Hit 'Export' in the top right.

    • In the pop up, select the desired objects and click the STL button.

  2. Each printer has a web interface that you can access and send parts to the printer. We do all of this from the web browser. In the address bar, type in either alphaprinter/ or betaprinter/
    • Each printer has a web interface that you can access and send parts to the printer. We do all of this from the web browser.

    • In the address bar, type in either alphaprinter/ or betaprinter/

    • Login using either alpha or beta for the username on each printer. Password is thinkinggirls

  3. Simply drag and drop your STL file onto the printer's web interface. Make sure to drop it in the left side of the page. No the SD card side. Once the STL uploads, there will be a pop up.
    • Simply drag and drop your STL file onto the printer's web interface. Make sure to drop it in the left side of the page. No the SD card side.

    • Once the STL uploads, there will be a pop up.

    • Set the slicing profile for FastCrude... and set the 'After Slicing' to Start Printing.

    • Hit the blue 'Slice' button and you are set!

Finish Line

Mr. Barnes

Member since: 10/31/2016

821 Reputation

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 84